Overview
The SENVEND UX700 payment terminal
Everything about your SENVEND UX700 payment terminal – from the technical data and the internet connection through to installation.
Data & Facts
Protection ratings, dimensions, connections and power supply at a glance.
Internet connection
Wi-Fi, LAN, RUT200 router and USB modem – how your terminal gets online.
Installation & Commissioning
Six steps from installation to the first test payment.
UX700 – Settings and Screens
Open the service page and see all service and customer screens at a glance.
Protection & Use
Suitable indoors and outdoors
The UX700 is built for demanding use on vending machines.
Suitable for outdoor use
The terminal is suitable for outdoor use and is water-resistant.
Protected against vandalism
The terminal complies with protection class IK08 and is therefore even protected against blows with a small hammer.
Mounting & Accessories
Mounting it correctly
The terminal fits the standardised EVA cut-out and can therefore be installed easily in most machines.
Optimal height for the face scan
The optimal mounting height for the face scan is approximately 160 cm. If the terminal is installed higher, use our tilt adapter. If it is installed lower, some customers may have to bend down slightly.
No EVA cut-out available?
If you have no EVA cut-out available, you can use our surface-mount adapter. Angle adapters and surface-mount frames are available from your specialist dealer.
Frequently asked questions
Frequently asked questions
Is the terminal suitable for outdoor use?
Yes, the terminal is suitable for outdoor use and is water-resistant.
Is the terminal protected against vandalism?
Yes, the terminal complies with protection class IK08 and is therefore even protected against blows with a small hammer.
What is the best height for the face scan?
The optimal mounting height for the face scan is approximately 160 cm. If the terminal is installed higher than this, you should use our tilt adapter. If it is installed lower, some customers may need to bend down slightly.
How can the terminal be mounted?
The terminal fits the standardised EVA cut-out and can therefore be installed very easily in most machines. If you have no EVA cut-out available, you can use our surface-mount adapter.
+49 231 4499210
Overview
The SENVEND UX700 payment terminal
Everything about your SENVEND UX700 payment terminal – from the technical data and the internet connection through to installation.
Daten & Fakten
Protection ratings, dimensions, connections and power supply at a glance.
Internet connection
Wi-Fi, LAN, RUT200 router and USB modem – how your terminal gets online.
Einbau & Inbetriebnahme
Six steps from installation to the first test payment.
UX700 – Settings and Screens
Open the service page and see all service and customer screens at a glance.
Schutz & Einsatz
Suitable indoors and outdoors
The UX700 is built for demanding use on vending machines.
Suitable for outdoor use
The terminal is suitable for outdoor use and is water-resistant.
Protected against vandalism
The terminal complies with protection class IK08 and is therefore even protected against blows with a small hammer.
Montage & Zubehör
Mounting it correctly
The terminal fits the standardised EVA cut-out and can therefore be installed easily in most machines.
Optimal height for the face scan
The optimal mounting height for the face scan is approximately 160 cm. If the terminal is installed higher, use our tilt adapter. If it is installed lower, some customers may have to bend down slightly.
No EVA cut-out available?
If you have no EVA cut-out available, you can use our surface-mount adapter. Angle adapters and surface-mount frames are available from your specialist dealer.
Frequently asked questions
Frequently asked questions
Is the terminal suitable for outdoor use?
Yes, the terminal is suitable for outdoor use and is water-resistant.
Is the terminal protected against vandalism?
Yes, the terminal complies with protection class IK08 and is therefore even protected against blows with a small hammer.
What is the best height for the face scan?
The optimal mounting height for the face scan is approximately 160 cm. If the terminal is installed higher than this, you should use our tilt adapter. If it is installed lower, some customers may need to bend down slightly.
How can the terminal be mounted?
The terminal fits the standardised EVA cut-out and can therefore be installed very easily in most machines. If you have no EVA cut-out available, you can use our surface-mount adapter.